since mid 2018 we do not have any deployments
without deployment-id, it is time to put this
code to rest, this PR removes this old code as
its no longer valuable.
on setups with 1000's of drives these are all
quite expensive operations.
The rest of the peer clients were not consistent across nodes. So, meta cache requests
would not go to the same server if a continuation happens on a different node.
As node metrics should be scraped per node basis, use a sample
configuartion using all the nodes in targets.
Signed-off-by: Shubhendu Ram Tripathi <shubhendu@minio.io>
When no results match or another error occurs, add an error to the stream. Keep the "inspect-input.txt" as the only thing in the zip for reference.
Example:
```
λ mc support inspect --airgap myminio/testbucket/fjghfjh/**
mc: Using public key from C:\Users\klaus\mc\support_public.pem
File data successfully downloaded as inspect-data.enc
λ inspect inspect-data.enc
Using private key from support_private.pem
output written to inspect-data.zip
2024/04/11 14:10:51 next stream: GetRawData: No files matched the given pattern
λ unzip -l inspect-data.zip
Archive: inspect-data.zip
Length Date Time Name
--------- ---------- ----- ----
222 2024-04-11 14:10 inspect-input.txt
--------- -------
222 1 file
λ
```
Modifies inspect to read until end of stream to report the error.
Bonus: Add legacy commandline params
Add following metrics:
- used_inodes
- total_inodes
- healing
- online
- reads_per_sec
- reads_kb_per_sec
- reads_await
- writes_per_sec
- writes_kb_per_sec
- writes_await
- perc_util
To be able to calculate the `per_sec` values, we capture the IOStats-related
data in the beginning (along with the time at which they were captured),
and compare them against the current values subsequently. This is because
dividing by "time since server uptime." doesn't work in k8s environments.
the disk location never changes in the lifetime of a
MinIO cluster, even if it did validate this close to the
disk instead at the higher layer.
Return appropriate errors indicating an invalid drive, so
that the drive is not recognized as part of a valid
drive.
we have had numerous reports on some config
values not having default values, causing
features misbehaving and not having default
values set properly.
This PR tries to address all these concerns
once and for all.
Each new sub-system that gets added
- must check for invalid keys
- must have default values set
- must not "return err" when being saved into
a global state() instead collate as part of
other subsystem errors allow other sub-systems
to independently initialize.
* Allow specifying the local server, with env variable _MINIO_SERVER_LOCAL, in systems where the hostname cannot be resolved to local IP
* Limit scope of the _MINIO_SERVER_LOCAL solution to only containerized implementations
Return an error when the user specifies endpoints for both source
and target. This can generate many type of errors as the code considers
a deployment remote if its endpoint is specified.
HealObject() does not return an error in some cases, for example, when
an object is successfully reconstructed in one disk but fails with other
disks, another case is when a disk does not have the object is temporarily
disconnected
Add the After heal drives result in the audit output for better
analysis.
Set object's modTime when being restored
restored here refers to making a temporary local copy in the hot tier
for a tiered object using the RestoreObject API
we have been using an LRU caching for internode
auth tokens, migrate to using a typed implementation
and also do not cache auth tokens when its an error.
This fixes a regression from #19358 which prevents policy mappings
created in the latest release from being displayed in policy entity
listing APIs.
This is due to the possibility that the base DNs in the LDAP config are
not in a normalized form and #19358 introduced normalized of mapping
keys (user DNs and group DNs). When listing, we check if the policy
mappings are on entities that parse as valid DNs that are descendants of
the base DNs in the config.
Test added that demonstrates a failure without this fix.
Create new code paths for multiple subsystems in the code. This will
make maintaing this easier later.
Also introduce bugLogIf() for errors that should not happen in the first
place.
Using oidc.redirectUri in the values.yaml only works for the deployment.
When using the statefulset the environment variable
MINIO_IDENTITY_OPENID_REDIRECT_URI is not set. This leads to errors with
oicd providers. For example keycloak throws the error 'invalid
redirect_uri'.
This pull request fixes that.
This commit replaces the `KMS.Stat` API call with a
`KMS.GenerateKey` call. This approach is more reliable
since data key generation also works when the KMS backend
is unavailable (temp. offline), but KES has cached the
key. Ref: KES offline caching.
With this change, it is less likely that MinIO readiness
checks fail in cases where the KMS backend is offline.
Signed-off-by: Andreas Auernhammer <github@aead.dev>
Make sure to pass a nil pointer as a Transport to minio-go when the API config
is not initialized, this will make sure that we do not pass an interface
with a known type but a nil value.
This will also fix the update of the API remote_transport_deadline
configuration without requiring the cluster restart.
jiuker
Harshavardhana
Allan Roger Reid
Klaus Post
guangwu
Shubhendu
Aditya Manthramurthy
Shireesh Anjal
Alex
Poorna
Anis Eleuch
Alexander Thaller
Minio Trusted
Taran Pelkey
Krishnan Parthasarathi
Andreas Auernhammer
Sveinn